设为首页 加入收藏

TOP

模拟RAC两个节点内联网不通(五)
2014-11-24 08:04:37 来源: 作者: 【 】 浏览:3
Tags:模拟 RAC 两个节点 联网 不通
81 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4408302397 (4.1 GiB) TX bytes:4408302397 (4.1 GiB)
发现eth1信息已经不存在
6:检测eth1状态
[root@rac2 rac2]# ethtool eth1
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: umbg
Wake-on: d
Current message level: 0x00000007 (7)
Link detected: no
发现Link detected: no 没有连接,此时基本可以确定是因为eth1网卡出现问题导致
7:尝试启动eth1
[root@rac2 rac2]# ifup eth1
[root@rac2 rac2]# ifconfig
eth0 Link encap:Ethernet HWaddr 08:00:27:7E:55:A2
inet addr:10.13.12.151 Bcast:10.13.12.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe7e:55a2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3234866 errors:0 dropped:0 overruns:0 frame:0
TX packets:2944876 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:206223173 (196.6 MiB) TX bytes:185088986 (176.5 MiB)
eth1 Link encap:Ethernet HWaddr 08:00:27:39:CE:0A
inet addr:192.168.1.151 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe39:ce0a/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:29191531 errors:0 dropped:0 overruns:0 frame:0
TX packets:44185710 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13825036931 (12.8 GiB) TX bytes:39052959687 (36.3 GiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6074868 errors:0 dropped:0 overruns:0 frame:0
TX packets:6074868 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4408312520 (4.1 GiB) TX bytes:4408312520 (4.1 GiB)
启动成功
8:查看节点2的os信息,crs日志,alter日志,并无新的输出
[grid@rac2 ~]$ crsctl check crs
CRS-4638: Oracle High Availability Services is online
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
9:尝试启动CRS,启动失败
[root@rac2 ~]# cd /u01/app/11.2.0.3/grid/bin/
[root@rac2 bin]# ./crsctl start crs
CRS-4640: Oracle High Availability Services is already active
CRS-4000: Command Start failed, or completed with errors.
10:尝试停止CRS,失败
[root@rac2 bin]# ./crsctl stop crs
CRS-2796: The command may not proceed when Cluster Ready Services is not running
CRS-4687: Shutdown command has completed with errors.
CRS-4000: Command Stop failed, or completed with errors.
[root@rac2 bin]# ./crsctl start has
CRS-4640: Oracle High Availability Services is already active
CRS-4
首页 上一页 2 3 4 5 6 7 下一页 尾页 5/7/7
】【打印繁体】【投稿】【收藏】 【推荐】【举报】【评论】 【关闭】 【返回顶部
分享到: 
上一篇oracle 10g RAC节点重启,但是没.. 下一篇重新校正节点运行的实例

评论

帐  号: 密码: (新用户注册)
验 证 码:
表  情:
内  容:

·微服务 Spring Boot (2025-12-26 18:20:10)
·如何调整 Redis 内存 (2025-12-26 18:20:07)
·MySQL 数据类型:从 (2025-12-26 18:20:03)
·Linux Shell脚本教程 (2025-12-26 17:51:10)
·Qt教程,Qt5编程入门 (2025-12-26 17:51:07)