源码下载的地方：
http://pkgs.fedoraproject.org/repo/pkgs/
dbus-1.2.16.tar.gz download
Bluez交叉编译移植到arm linux .
Version：
Bluez:3.36
Gcc :arm-linux-gcc-3.4.1
所需软件包：
libxml2-2.7.4
dbus1.0.2
glib-2.16.5
bluez-utils-3.36依赖于dbus和glib,而dbus依赖于libxml2,所以编译顺序是libxml,dbus,glib,bluez-utils-3.36.
流程写的简单,其实在我自己的编译过程中出现了无数的问题,只是都简化到配置里面去了,所以configuare一定要配置好.
1.编译bluez-libs-3.36
./configure --host=arm-linux --prefix="$PWD/../release/bluez_libs"
make&make install
没有什么依赖库的问题，直接编译通过.
2.编译libxml2-2.7.4
./configure --prefix="$PWD/../release/bluez_libs" --host=arm-linux
make
make install
没有依赖库，顺利通过
3.编译dbus1.0.2
echo ac_cv_have_abstract_sockets=yes>arm-linux.cache
./configure --prefix="$PWD/../release/bluez_libs" --host=arm-linux CC="arm-linux-gcc -I/home/jay/tools/bluez3/release/bluez_libs/include -L/home/jay/tools/bluez3/release/bluez_libs/lib" --cache-file=arm-linux.cache --with-x=no
--with-xml=libxml PKG_CONFIG_PATH="$PWD/../release/bluez_libs/lib/pkgconfig"
make&make install
顺利通过了
4.编译glib-2.16.5
echo ac_cv_type_long_long=yes>arm-linux.cache
echo glib_cv_stack_grows=no>>arm-linux.cache
echo glib_cv_uscore=no>>arm-linux.cache
echo ac_cv_func_posix_getgrgid_r=yes>>arm-linux.cache
echo ac_cv_func_posix_getpwuid_r=yes>>arm-linux.cache
./configure --prefix="$PWD/../release/bluez_libs" --host=arm-linux CC="arm-linux-gcc -I/home/jay/tools/bluez3/release/bluez_libs/include
-L/home/jay/tools/bluez3/release/bluez_libs/lib" --cache-file=arm-linux.cache PKG_CONFIG_PATH="$PWD/../release/bluez_libs/lib/pkgconfig"
#make
#make install
5.编译bluez-utils-3.36.
./configure --prefix="$PWD/../release/bluez_libs" --host=arm-linux CC="arm-linux-gcc -I/home/jay/tools/bluez3/release/bluez_libs/include -L/home/jay/tools/bluez3/release/bluez_libs/lib -shared" PKG_CONFIG_PATH="$PWD/../release/bluez_libs/lib/pkgconfig" --disable-audio --enable-test
make&make install
如果不追加-shared,会出现很讨厌的__fini_array_start错误.
遇到storage.c:286: error: error: `ENOKEY' undeclared
修改storage.c 增加#define ENOKEY 161
至此bluez编译完毕.
文件系统的制作:
将sbin和bin下的文件复制进文件系统的sbin下面,lib文件需要的有
libbluetooth.so
libbluetooth.so.2 libbluetooth.so.2.11.2
libxml2.so
libxml2.so.2 libxml2.so.2.7.4
libglib-2.0.so
libglib-2.0.so.0 libglib-2.0.so.0.1600.5
libgmodule-2.0.so.0 libgmodule-2.0.so.0.1600.5
前面是软链接,后面是本尊
将etc文件夹复制过去.
最后记得把hcidump(需要另外编译,没有任何难度)复制到sbin,它方便调试的
以下是Leeu我的编译遇到 的问题.
libusb 要用到g++
./configure --prefix=/opt/libs --host=arm-linux CC="arm-none-linux-gnueabi-gcc" CXX=arm-none-linux-gnueabi-g++
dbus的编译，把下面整个一起执行
USE_ARCH=32 NM=nm CC="arm-none-linux-gnueabi-gcc ${BUILD32}" ./configure --prefix=/opt/libs --host=arm-linux --target=arm-linux CC="arm-none-linux-gnueabi-gcc -I/opt/libs/include -L/opt/libs/lib" --cache-file=arm-linux.cache --with-x=no
否则会报libtool中 eva l的错误
4.编译glib-2.16.5
echo ac_cv_type_long_long=yes>arm-linux.cache
echo glib_cv_stack_grows=no>>arm-linux.cache
echo glib_cv_uscore=no>>arm-linux.cache
echo ac_cv_func_posix_getgrgid_r=yes>>arm-linux.cache
echo ac_cv_func_posix_getpwuid_r=yes>>arm-linux.cache
./configure --prefix=/opt/libs --host=arm-linux CC="arm-none-linux-gnueabi-gcc -I/opt/libs/include -L/opt/libs/lib" --cache-file=arm-linux.cache PKG_CONFIG_PATH=/opt/li