mini2440 LED驱动程序：

myled.c

#include
#include
#include
#include
#include
#include
#include
#include
#include
/*#include "gpio-nrs.h"*/

//add tsuibin

#include
#include
#include
#include

#include
#include
#include

#include

#define MYLED_COUNT 1
#define MYLED_NAME "myled"
#define S3C2410_GPB5 S3C2410_GPB(5)
#define S3C2410_GPB6 S3C2410_GPB(6)
#define S3C2410_GPB7 S3C2410_GPB(7)
#define S3C2410_GPB8 S3C2410_GPB(8)

// S3C2410_GPIO_OUTPUT
static struct cdev myled_cdev;
static struct class *myled_class;
static struct device *myled_device;

static unsigned long led_table[] = {
S3C2410_GPB (5),
S3C2410_GPB (6),
S3C2410_GPB (7),
S3C2410_GPB (8),
};

ssize_t
myled_read (struct file *filp, char __user * buf, size_t count,
loff_t * f_pos)
{
return 0;
}

ssize_t
myled_write (struct file * filp, const char __user * buf, size_t count,
loff_t * f_pos)
{

unsigned int pin;
unsigned int led_off = 0;
unsigned long offs;
unsigned long flags;
unsigned long dat;
void *base;

pin = buf[0] - '0';
if (buf[1] == '0')
{
led_off = 1;
}
if (pin >= 4 || pin < 0)
return -1;

pin = led_table[pin];

base = S3C24XX_GPIO_BASE (pin);
offs = S3C2410_GPIO_OFFSET (pin);
local_irq_save (flags);

dat = __raw_readl (base + 0x04);
dat &= ~(1 << offs);
dat |= led_off << offs;
__raw_writel (dat, base + 0x04);

local_irq_restore (flags);

return count;
}

int
myled_ioctl (struct inode *inode, struct file *filp, unsigned int cmd,
unsigned long arg)
{

return 0;
}

int
myled_open (struct inode *inode, struct file *filp)
{
return 0;
}

int
myled_release (struct inode *inode, struct file *filp)
{
return 0;
}

struct file_operations myled_fops = {
.owner = THIS_MODULE,
.read = myled_read,
.write = myled_write,
.ioctl = myled_ioctl,
.open = myled_open,
.release = myled_release,
};

static int __init
myled_init (void)
{
int ret;
dev_t dev;

/* config gpbcon */
/* S3C2410_GPIO_BANKB */
/* S3C2410_GPIO_OUTPUT */
void *base;
int i;
unsigned int pin;
unsigned int function;
unsigned long mask;
unsigned long con;
unsigned long flags;

ret = alloc_chrdev_region (&dev, 0, MYLED_COUNT, MYLED_NAME);
if (ret < 0)
{
printk ("get dev error!\n");
return -1;
}
cdev_init (&myled_cdev, &myled_fops);
cdev_add (&myled_cdev, dev, 1);

myled_class = class_create (THIS_MODULE, MYLED_NAME);
myled_device = device_create (myled_class, NULL, dev, NULL, MYLED_NAME);

for (i = 0; i < 4; i++)
{
pin = led_table[i];
function = S3C2410_GPIO_OUTPUT;
base = S3C24XX_GPIO_BASE (pin);
mask = 3 << S3C2410_GPIO_OFFSET (pin) * 2;
function &= 3;
function <<= S3C2410_GPIO_OFFSET (pin) * 2;
local_irq_save (flags);
con = __raw_readl (base + 0x00);
con &= ~mask;
con |= function;
__raw_writel (con, base + 0x00);
local_irq_restore (flags);

}
printk ("module init\n");

return ret;
}

static void __exit
myled_exit (void)
{

dev_t dev;
printk ("module exit\n");

dev = myled_cdev.dev;

device_destroy (myled_class, dev);
cdev_del (&myled_cdev);
unregister_chrdev_region (dev, 1);
class_destroy (myled_class);

return;
}

module_init (myled_init);
module_exit (myled_exit);
MODULE_LICENSE ("Dual BSD/GPL");
MODULE_AUTHOR("Tsuibin");

具体下载目录在 /2012年资料/7月/9日/mini2440 LED驱动程序