|
L4nk0r
方法一：
1.添加成员变量CStatusBarCtrl m_StatusBar;
2.在OnInitDialog()中加入：
m_StatusBar.Create(WS_CHILD|WS_VISIBLE|SBT_OWNERDRAW, CRect(0,0,0,0), this, 0);
int strPartDim[3]= {100, 200, -1}; //分割数量
/////这里要说明一下，分割的大小是这样决定的，如上面分的3个窗口，第一大小为100，第二个也为100（即200-100），第三个是状态栏的整个大小减去200.
m_StatusBar.SetParts(3, strPartDim);
//设置状态栏文本
m_StatusBar.SetText("分栏一", 0, 0);
m_StatusBar.SetText("分栏二", 1, 0);
m_StatusBar.SetText("分栏三", 2, 0);
//下面是在状态栏中加入图标
m_StatusBar.SetIcon(1,
SetIcon(AfxGetApp()->LoadIcon(IDR_MAINFRAME),
FALSE));//为第二个分栏中加的图标
方法二：
1.添加成员变量CStatusBar m_wndStatusBar;
2.在OnInitDialog()中加入：
static UINT indicators[] =
{
ID_SEPARATOR, // status line indicator
ID_INDICATOR_CAPS, //CAP lock indicator.
ID_INDICATOR_NUM, //NUM lock indicator.
ID_INDICATOR_SCRL, //SCRL lock indicator.
};
if (!m_wndStatusBar.Create(this) ||
!m_wndStatusBar.SetIndicators(indicators,
sizeof(indicators)/sizeof(UINT)))
{
TRACE0("Failed to create status barn");
return -1; // fail to create
}
UINT nID; //控制状态栏里面的分栏
m_wndStatusBar.SetPaneInfo(0,nID,SBPS_STRETCH|SBPS_NOBORDERS,100); //返回值存nID中
m_wndStatusBar.SetPaneText(0,"就绪");
m_wndStatusBar.SetPaneInfo(1,nID,SBPS_NORMAL,100);
m_wndStatusBar.SetPaneText(1,"大写");
m_wndStatusBar.SetPaneInfo(2,nID,SBPS_POPOUT,100);
m_wndStatusBar.SetPaneText(2,"数字");
// SetPaneInfo()函数的第三个参数的可选项如下：
// The following indicator styles are supported:
// SBPS_NOBORDERS No 3-D border around the pane.
// SBPS_POPOUT Reverse border so that text "pops out."
// SBPS_DISABLED Do not draw text.
// &nbs
|